 |
I needed a new brake duct system to go with the SN95 spindles I installed on the car. I located a bracket built by Mirage Motorsports. It bolts directly to the spindle in old holes used by the OEM dust shield. |
 |
You can buy it with or without hose. Here you see my hose attached to the rotor cooling duct |
 |
I'll route the hose inboard near the frame. |
 |
and along to the backside of the front bumper where it will attach with duct tape to the bumper duct. |
 |
Here is a front view of the bumper air duct. |